Wii DNS Setup for Smart DNS Proxy

Wii DNS Setup Instructions for Smart DNS Proxy Service

If you are planning to use Wii with Smart DNS Proxy Service we recommend you to configure your router. So every device connected to your router will benefit from Smart DNS Proxy at the same time as well as Wii. Please find router configuration details in our How to Setup page.

Incase if you want to setup your Wii only, please follow up the following instructions:

1. Open Wii Options.

2. Goto Wii Settings.

3. Click the right arrow once to view the  Internet Options and  Click Internet.

4. Select Connect Settings.

5. Select the Connection Profile which is Active.

6. Click Change Settings.

7. Scroll Right to Auto-Obtain DNS 
(Don't make any change on Auto-Obtain IP Address).

8. Select No and  Open Advanced Settings.

9. Enter Smart DNS Proxy DNS. Select the closest server to your physical location from  following:
The list of IP addresses of our DNS severs can be found on our DNS Server List here: https://www.smartdnsproxy.com/Servers

10. Click Confirm.

11. Click Save.

12. Click OK.

13. 
Connection Test should now start and wait until it's done. Then return to main screen.

Attention

Make sure to RESTART your Wii!


* Remember whenever your Wii/Router IP changes, our service will stop working for you. You will need to LOG INTO Smart DNS Proxy and UPDATE your IP address so that our system could check your IP address and add your new IP to our database. Then, you will be able to continue using our service. If this is the first time you set up, we also suggest you to log in with your PC to our site from the same Wired/Wireless network to show our system your IP address.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.