LG TV Setup for Smart DNS Proxy

LG Smart TV Smart DNS Proxy Settings

Following setup instructions are only needed one time. Once you finish the initial setup, you won't be needing to take the same steps again. Your connection will work automatically *anytime!

--- --- ---
This instruction for only as guideline and different TV models may have different interface. Please make sure you have the most recent firmware available. 
1. Turn On your LG Smart TV and  Press Settings.

2. From this settings menu  Scroll Down to  Network and  Select Network Connection.

3. Make sure that your LP Smart TV is connected to LAN or Wireless network.  Press Start Connection.

4. Select Your Network and then  Select Other Network List.

5. Select Set Expert Button.

6. Select Your Network Connection.

7. Scroll Down to the  DNS Mode and select  Manual Tab. Then enter  Smart DNS Proxy Servers IP from following and  Press OK. Select the two of the closest servers to your physical location.
The list of IP addresses of our DNS severs can be found on our DNS Server List here: https://www.smartdnsproxy.com/Servers
8. It will test the connection. Press  Complete to save the settings and exit the menu.

Now restart your LP Smart TV and it will start using Smart DNS Proxy.

* Remember whenever your TV/Router IP changes, our service will stop working for you. You will need to LOG INTO Smart DNS Proxy so that our system could check your IP address and add your new IP to our database. Then, you will be able to continue using our service. If this is the first time you set up, we also suggest you to log in with your PC to our site from the same Wired/Wireless network to show our system your IP address.
Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.