TP-LINK Router Setup for Smart DNS Proxy

The following setup instructions is only needed one time. Once you finish the initial setup, you won't be needing to take the same steps anytime. Your connection will work automatically *anytime!

--- --- ---
This instruction is only a guideline and different router models may have different interface. Please make sure you have the most recent firmware available. 

1. Open Router Administration Page. Usually http://192.168.1.1 or http://192.168.0.1 or http://192.168.2.1.

2. Enter Your User Name and  Password if you have one.Default name is  admin and the default password is  password.

3. Click on  DHCP on the left and  DHCP Setting.

4. Fill DNS Server fields with the Smart DNS Proxy IPs from the list.

The list of IP addresses of our DNS severs can be found on our DNS Server List here: https://www.smartdnsproxy.com/Servers. Use the closest DNS servers to your physical location. Select the closest server to your physical location as Primary. Then select the 2nd closest server to your physical location as Secondary server.

5. Click on Save Settings or OK button.

Attention

Make sure to RESTART your Router!


* Remember whenever your PC/Router IP changes, our service will stop working for you. You will need to LOG INTO Smart DNS Proxy and UPDATE your IP address so that our system could check your IP address and add your new IP to our database. Then, you will be able to continue using our service. If this is the first time you set up, we also suggest that you log in with your PC to our site from the same Wired/Wireless network to show our system your IP address.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.