DD-WRT DNS Setup for Smart DNS Proxy

The following Smart DNS Proxy setup instructions for dd-wrt router is only needed one time. Once you finish the initial Smart DNS Proxy setup on your dd-wrt router, you won't be needing to take the same steps anytime. Your connection will work automatically *anytime!

--- --- ---
This instruction is only a guideline and different router models may have different interface. Please make sure you have the most recent firmware available. 

Please find Smart DNS Proxy setup instructions for DD-WRT Router below:

1. Select SETUP from the top tabs and then select BASIC Setup below that.

2. Change Static DNS 1, Static DNS 2 and Static DNS 3 from the Network Address Server Settings (DHCP) section as following: chose the servers closest to your physical location.
The list of IP addresses of our DNS severs can be found on our DNS Server List here: https://www.smartdnsproxy.com/Servers.
3. Apply the Settings.

Attention

Make sure to RESTART your DD-WRT Router!


* Remember whenever your PC/Router IP changes, our service will stop working for you.  You will need to LOG INTO Smart DNS Proxy and UPDATE your IP address s o that our system could check your IP address and add your new IP to our database. Then, you will be able to continue using our service. If this is the first time you set up, we also suggest that you log in with your PC to our site from the same Wired/Wireless network to show our system your IP address.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.