Asus Router DNS Setup for Smart DNS Proxy

The following Asus Router Smart DNS setup instruction is only needed one time. Once you finish the initial Smart DNS Proxy setup on your Asus Router, you won't be needing to take the same steps anytime. Your connection will work automatically *anytime!

--- --- ---
This instruction is only a guideline and different router models may have different interface. Please make sure you have the most recent firmware available. 

Please find Smart DNS Proxy setup instructions for Asus Router below:

1. Log in to your Asus Router Admin Panel.

Most Asus Router Admin panels can be reached via typing into the Internet Web Browser address bar. If it doesn't work, then you can try or

2. Enter your Asus Router admin panel username and password and LOG IN. The default credentials are  admin for username and  admin for password. You can find the correct information from your router manual handbook.

3. Click on WAN.

4. Find Connect to a DNS Server Automatically and set it to NO.

5. Enter Smart DNS Proxy DNS IPs to DNS Server 1 & DNS Server 2 sections.

The list of IP addresses of our DNS severs can be found on our DNS Server List here: Use the closest DNS servers to your physical location. Select the closest server to your physical location as Primary. Then select the 2nd closest server to your physical location as Secondary server.

6. Click on Apply.


Make sure to RESTART your Asus Router!

* Remember whenever your PC/Router IP changes, our service will stop working for you.  You will need to LOG INTO Smart DNS Proxy and UPDATE your IP address so that our system could check your IP address and add your new IP to our database. Then, you will be able to continue using our service. If this is the first time you set up, we also suggest that you log in with your PC to our site from the same Wired/Wireless network to show our system your IP address.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.