2Wire Router Setup for Smart DNS Proxy

The following setup instructions is only needed one time. Once you finish the initial setup, you won't be needing to take the same steps anytime. Your connection will work automatically *anytime!he

--- --- ---
This instruction is only a guideline and different router models may have different interface. Please make sure you have the most recent firmware available. 

1. Click http://home/ to open the Router Administration Page. If the above link does not work then try http://172.16.0.1/ or http://192.168.2.1/.

Choose Broadband Link tab on Summary page:

2. Click on Advanced Settings.

3. Select Manually Configure Your DNS Information and Fill DNS Fields with the following values for Primary and Secondary Servers.

The list of IP addresses of our DNS severs can be found on our DNS Server List here: https://www.smartdnsproxy.com/Servers. Use the closest DNS servers to your physical location. Select the closest server to your physical location as Primary. Then select the 2nd closest server to your physical location as Secondary server.

Then  Click on  Save Button


Attention

Make sure to RESTART your Router!


* Remember whenever your PC/Router IP changes, our service will stop working for you.  You will need to LOG INTO Smart DNS Proxy and UPDATE your IP address . So our system will check your IP address and add your new IP to our database. Then you will be able to continue using our service. If this is the first time you setup, we also suggest that you log in with your PC to our site from the same Wired/Wireless network to show our system your IP address.
Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.